Sima STAR-16 GO Manual De Instrucciones Original página 34

6.2 PARTS OF THE BENDING PLATE.
The plate has many holes for different purposes.
6.3 INVERSION PIN TO CONTROL THE BENDING ANGLE.
The inversion pin "P" is how we select the bending angle of the plate. Depending on if the plate is moving
clockwise or counterclockwise, we have to put the pin on the left or the right of the limit switch "S2".
The limit switch S2, it to stop the plate turning when the inversion pin P touches it.
The limit switch S1, is for stopping the plate when it returns to its original position.
1. Holes for pushing mandrel. Depending on the
size of bar the mandrel can be put in different
positions.
2. Screw holes for extracting the bending plate.
3. Micro plate for stopping.
4. Holes for the pivot bending pin.
11
ENGLISH