Publicidad
Idiomas disponibles
Idiomas disponibles
Illustration F and G:
6. Place the inner tent
Attach the fastening hooks of inner tent to the
metal loops on the front side and plastic loops
on the back of the outer tent.
Illustration G:
7. Attach the fastening hooks of outer ground
sheet
to the metal loops on the front side
[
6 ]
and plastic loops on the door of the outer tent
.
[
1 ]
Illustration H:
8. Open the ventilating windows
them with the spacers
9. Secure the tent
1 ]
[
tensioning guy ropes
with the tent pegs
[
5 ]
10. Stretch the tent until taut and pull all of the
corners and guy ropes
11. Do not over-tighten the guy ropes
strength of the wind increases the attachment
point and seam of the tent might tear.
Illustration I:
12. Open the entrance, unroll it and attach it with
the two fasteners.
˜ Taking down the tent
Clean the tent both inside and outside before
you take the tent down. The tent must be
dismantled in the reverse order to the manner
in which it has been erected.
˜ Packing the tent together
m
CAUTION! Please ensure that the tent is
completely dry before you pack it together.
Otherwise this may result in stains and damage
to the fabric.
in the outer tent
7 ]
[
[
1 ]
and secure
[
8 ]
.
9 ]
[
until taut and pull all of by
and floor fastenings
4 ]
[
.
until they are tight.
[
4 ]
, if the
4 ]
[
m
CAUTION! The tent pegs
.
individual parts must be packed separately in
the bags provided. Otherwise the tent pegs
might damage the tent.
Always fold the tent together in such a way
that the floor of the tent is facing outwards.
Collect all of the parts together carefully before
you pack the tent. You should count the parts
in order to ensure that none of them have been
mislaid or lost.
After the tent has been rolled up, pack it
carefully into the carrying bag.
˜ Cleaning and care
CAUTION! Never wash the tent in a washing
m
machine. Otherwise the product may lose
some of its ability to keep out water.
m
CAUTION! Never use petrol, solvent or other
cleaning agents. Otherwise there is a risk of
damage to the product.
Condensation can form in all synthetic tents;
you should therefore air the tent as frequently as
possible in order to counteract this.
Remove any dirt from the tent with a soft
sponge and clean water.
Please allow all parts to dry thoroughly
before you repack the tent. This will prevent
the formation of mould, bad odours and
discolouration.
If the zipper sticks when being opened or
closed, spray it with silicone spray.
The product may lose some of its ability to
keep out water with frequent use. Therefore
you should spray the tent regularly with a
waterproofing agent (available in DIY shops,
camping shops etc.).
Store the product in a cool dry area.
and other
5 ]
[
GB/IE
11
Publicidad
