Roadstar CDR-4500U Manual De Instrucciones página 5

periods. Long exposure to high temperatures can warp the disc.
• Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
CD/MP3 PLAYBACK
Loading and Unloading Compact Discs
1. Set the Function Selector (9) to the CD/MP3/USB Position.
2. Open the disc compartment by lifting the CD OPEN corner (6).
3. When the door has opened, remove a disc from its case and place it carefully in the
compartment with the label side facing up. Locate 3" discs, on the central spindle in the
compartment.
4. Close the door by pressing on the corner of the CD door.
The total number of tracks appears on the display: Playback starts.
During playback, the actual track appears.
5. Adjust the VOLUME control to your desired listening level.
6. To stop playback temporarily, press the PLAY/PAUSE ( II ) button (17) once. The Play
indicator will flash on the display. Press the PLAY/PAUSE ( II ) button again to resume
playback.
7. To stop playback, press the STOP (<) (19) button once.
8. To switch OFF the unit select TAPE with the Function Selector (9).
Notes:
• When the CD door is accidentally opened during playback, " OP " will appear on the
display.
• Wait until the disc is fully stopped before opening the CD (2) compartment.
• This unit can play 3" (8cm) single CDs without an adaptor.
Loading MP3 files from a USB memory Stick
1. Set the function switch to CD/MP3/USB.
2. Connect the MP3 player to the USB port to switch it on.
3. Once playing, the USB MP3 track can be selected in the same way as the CD tracks.
5
English
LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK
1.
2.
3.
4.
Note: Low level audio will be heard during the search process to assist in locating the
REPEAT PLAYBACK WITH CD
1.
2.
3.
REPEAT PLAYBACK WITH MP3
1.
2.
3.
4.
6
English
Press the SKIP DN (9)(14) button once to go back to the beginning of the current track.
Press the SKIP DN button repeatedly to go back to previous tracks.
Press the SKIP UP (:)(13) button repeatedly to go to next tracks.
Press and hold either SKIP UP or SKIP DN button to search backwards or forwards, at
high speed, a particular point of track.
correct point in the track.
Press the PLAY/PAUSE button (17).
To repeat the same track, press the REPEAT button (11) once. The indicator 'REP'
symbol appears on the display.
The CD will start single repeat playback until STOP button (19) is pressed. Press the
REPEAT button 3 times more to cancel single repeat. The indicator 'REP' disappears
from the display.
To repeat the entire disc, press the REPEAT button (11) twice. REP ALL will appear on
the display.
Press the MODE button 3 times more to cancel all disc repeat. The indicator REP ALL
disappears from the display.
Press the PLAY/PAUSE button (17).
To repeat the same track, press the REPEAT button (11) once. The indicator 'REP'
appears on the display.
The CD will start single repeat playback until STOP button (19) is pressed. Press the
REPEAT button 3 times more to cancel single repeat. The indicator 'REP' disappears
from the display.
To repeat the entire disc, press the REPEAT button (11) three times. REP ALL will
appear on the display.
Press the REPEAT button 1 time more to cancel all disc repeat. The indicator
disappears from the display.