Descargar Imprimir esta página

Roadstar CDR-4500U Manual De Instrucciones página 6

Radio lector de casetes y cd/cd-r/cd-rw/mp3 estéreo portátil, entradas usb

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
PROGRAMMED PLAYBACK FOR CD/USB
IN CD
1.
Press the PLAY/PAUSE button (17) and after 5 seconds the STOP button (19).
2.
Press the PROGRAM button (12). The track number "P-01" will appear and "PROG" will
appear on the display indicating the first selection.
3.
Press SKIP DN (9) or SKIP UP (:) button to select the desired track to be programmed.
The track number which will be programmed will appears on the display.
4.
Press once the PROGRAM button (12) to enter the track into memory. "P-02" will appear.
5.
Repeat the steps 3 and 4 to program up to 21 tracks.
6.
Press PLAY/PAUSE ( II) button (10) once to start programmed playback.
7.
To cancel programmed playback, press the STOP button (19) twice.
Note:
During program playback, if you wish to repeat the entire programmed playback,
press the REPEAT button (11) repeatedly until the "REP" indicator appears on the
display.
ANTI-SHOCK FUNCTION
If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a
moving vehicle), The ANTI-SHOCK function is active to provide uninterrupted playback
when power on.
Should the player receive shocks for more than 50 seconds continuously in CD playback
or 55 seconds in MP3 playback, the sound can mute for a very short while and will
resume once the player has stabilised from the shock.
Notes:
The Anti-shock function will not correct the errors arising from the use of defective
scratched or dirty discs.
IMPORTANT! During CD/MP3 playback, the ANTI-SHOCK function is always ON and
this function can not be disactivated.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference
to a radio tuner nearby switch this unit off while operating other radio devices.
This product utilizes a laser
Danger - Invisible laser radiation when opened and interlock failed or defeated. Avoid
direct exposure to the beam.
7
English
Caution - Use of controls, adjustments, or procedures not listed in this manual may result
SPECIFICATIONS
Power Supply
AC:
Batteries:
Radio Frequency Coverage
FM:
MW:
General
Headphones:
CD Player
Pick Up:
Encoding:
Note: Specifications and the design are subject to possible modifications without notice due to
improvement.
8
English
in hazardous radiation exposure.
Concerning Compact Discs
Only compact discs identified with this mark can be used with
this player.
230V ~ 50Hz
6 x UM-2
87.5 - 108 MHz
540 - 1600 kHz
3.5mm stereo jack plug, 8-32W
3-Beam. Semiconductor Laser
16-Bit Linear
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.

Publicidad

loading