Costway NP10048 Manual Del Usuario página 4

Swing Assembling
1.Swing arrives including 4 tubes,
2 hanging ropes, and 1 swinging
body and a pillow for assembly.
4.Put the tube like this.
7.Put the screw bolt through the
Velcro cover.
10.Use wrench to tighten it.
2.Put the swinging body on the
floor, and put the 4 Velcro covers
in the direction of black mat.
5. Insert the 2nd tube into the
sleeve; connect two tubes by small
socket to big socket.
8.Insert the screw bolt into the
holes of frame tube.
Make sure the holes are aligned.
11.Put the pillow onto it, now
assembly finished and ready for
swing.
04
3.Insert the tube with foam into the
sleeve.
6. Repeat it until all the tubes
connected.
9.Fix it by the washer and nut.