Ua-5 Application Guide; Basic Use - Edirol UA-5 Guía De Iniciación

UA-5 application guide

This chapter explains the various ways the UA-5 can be connected, and introduces
some of its applications.
* Before connecting to other devices, you must turn down the volume and turn off the power
to avoid malfunction or speaker damage.

Basic use

As shown in the diagram, you can connect headphones or monitor speakers, and
monitor the playback sound from your application or the sound from the
instrument or audio device to which the UA-5 is connected.
fig.basic.e
Signal flow
OUTPUT
INPUT
Mixer
About the Sampling frequency select switch setting
• The UA-5's Sampling frequency select switch must be set to match the
sampling frequency of the application you are using.
• 96 kHz REC and 96 kHz PLAY are valid only in Advanced mode (ADVANCE
(mode select) switch ON).
• The playback sound from your application will not be heard if the Sampling
frequency select switch is set to 96 kHz REC.
• It will not be possible for your application to record the sound from an
instrument or audio device connected to the UA-5 if the Sampling frequency
select switch is set to 96 kHz PLAY.
42
OUTPUT
Audio cable
LINE IN
Stereo set
Stereo
Headphones
PHONES
USB
port
USB cable
USB
port
Computer