Giordani SWEET CANDY 2in1 Manual De Instrucciones página 19

1. Turn the baby walker frame upside down. Fix the wheels in the appropriate housings. Ensure that the wheels
are firmly pushed all the way into the housing on the lower base of the walker.
2. Fix the rear fixed wheels in the appropriate housings. Ensure that the wheels are firmly pushed all the way
into the housing on the lower base of the walker.
3. Fix the safety rubbers in the appropriate housings. Ensure that the safety rubbers are firmly pushed all the
way into the housing on the lower base of the walker.
4. Open the baby walker frame in the in-use position, ensuring that all wheels touch the floor. Slowly raise
the tray by pulling it in an upward direction, until a click indicates that the frame has been locked correctly
in one of the three positions.
5. Insert the plastic rings of the padded seat in the slots located along the upper edge of the walker frame.
Pass the rings through the slots and tug them until they clear the passage, then release them, ensuring
that they are correctly locked in the position and cannot recede into the slot.
6. Fit the large spoiler on the rear walker frame; simply place it on the housings, located at the rear of
the backrest, and push it firmly in a downward direction, ensuring that it has been fitted in the correct
position. Please do not lift up baby walker with large spoiler. It is dangerous doing it this way.
7. Insert all small toy parts into corresponding holes. Put the electronic play tray into its housing in
front of the walker's seat. Listen for two clicks to confirm the play tray is safely locked in place.
8. Place the hooks on to the tube at the corresponding position to fix the foot rest well when in rocking
function.
9. Assembly is complete.
WARNING When opening, closing or adjusting the walker, ensure that your child is at a safety distance. Before placing
the child in the walker ensure that the secondary lock button is correctly locked again.
10. To adjust the seat's height, remove the child from the baby walking frame, pull up the safety button located under the
small tray table and rotate it to 90 degrees. Keep the safety button pressed, then raise or lower the small table until
the desired position is reached, then pull up the safety button and rotate it to 90 degrees again to lock the small
table. (If it is an automatic secondary lock, please make sure the lock is rotated to 90 degrees).
11. Use two hands to press the buttons on the two sides and turn over the two side boards 90 degrees, then it will
have changed to the rocking function.
12. Press the button as in the picture, meanwhile pull down the upper tray to the end, the frame folds up
completely.
13. WARNING The walker includes one electronic play tray that attaches to the walker frame as shown
in step 7. The function and use of the play tray are shown here.
A Cute bee rotating toy
B Amusing 360 degrees rotating flower-shaped windmill
C Lights twinkle with music when the lovely ladabug is pressed
D Sound keys
E Coloured shapes arch to move
F Switch
G Roll with coloured shapes to move back and forth
GR313_(exGR300)-SWEET CANDY_GirelloNuovo_v3P294_MOD_v6.indd 19 GR313_(exGR300)-SWEET CANDY_GirelloNuovo_v3P294_MOD_v6.indd 19
UK
ASSEMBLING PROCEDURES
HOW TO ADJUST THE HEIGHT OF BABY WALKER FRAME
HOW TO CONVERT WALKER TO ROCKER
HOW TO FOLD THE WALKER
USING ELECTRONIC PLAY TOY TRAY
19
23/11/22 10:14 23/11/22 10:14