Axor Starck 10455001 Instrucciones De Montaje / Manejo / Garantía página 2

T EC HN I C A L I N FO RMATIO N
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - 12456xx1, 10455001
spout
handshower
Flow rate - 10456xx1
spout
handshower
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTALL ATI ON CO N SIDE R ATION S
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ This trim is for use with rough 10452181 (not in-
cluded). The rough must be installed and the finished
floor surface completed and made watertight.
⁄ This unit is not anti-scald. If required by local plumb-
ing code, install this unit in combination with an
approved remote pressure balance valve or other
approved device.
2
15 - 75 PSI
120° - 140° F*
4.8 GPM (18.2 L/min)@ 44 PSI
max. 1.75 GPM (6.6 L/min)
4.8 GPM (18.2 L/min)@ 44 PSI
max. 2.0 GPM (7.6 L/min)
E N G L I S H
145 PSI
176°F*
⁄ Protection against backflow is provided by check
valve and an automatically resetting diverter.
⁄ 10455001, 12456xx1 only: This showerhead is for
use with an automatically compensating valve rated
at 1.3 GPM (4.9 L/min) or less.
⁄ 10456xx1 only: This showerhead is for use with an
automatically compensating valve rated at 1.5 GPM
(5.7 L/min) or less.
⁄ Keep this booklet and the receipt (or other proof of
date and place of purchase) for this product in a safe
place. The receipt is required should it be necessary
to request warranty parts.