Imtron ISY IGM 5000-BK Manual De Instrucciones página 7

Note: Be sure that there are no obstacles between the USB receiver and the wireless gaming mouse to ensure a
stable and uninterrupted connection.
5. Installation
1. This gaming mouse can be used either wirelessly or wired, only with compatible system requirements. The
process is as follows:
• Wired mode: Connect the USB-C plug of the USB cable to the USB-C port of the mouse and the USB-A plug
into an available USB-A port of your PC to establish a connection.
• Wireless mode: Plug the USB-A receiver into an available USB-A port of your PC that meets the system
requirements and connect the mouse through the 2.4G wireless antenna.
2. After successfully connecting the mouse, you may need to install the o cial drivers. To do this, follow the steps
below:
• Go to the o cial website: https://www.isy-online.eu/downloads or scan the QR code.
• Select the "IGM 5000" software in the download center and proceed to download the
file.
• Follow the instructions for installing the software as displayed on screen.
3. The resolution can be directly set at the mouse. For adjustment use DPI button.
The following preset resolutions are available: 400, 800, 1600, 3200, 6400, and 10000 DPI.
Note: 1600 DPI is the default setting.
6. Adjusting the LED settings
The workings of the mouse can be customized by making use of the compatible software, which can be
downloaded through the following link: https://www.isy-online.eu/downloads
The LED functions of the gaming mouse can be adjusted by making use of the compatible software. The gaming
mouse has two zones in which the LEDs can be customized, namely the backside of the mouse and the scroll wheel.
1. To adjust the LED lights at the backside of the gaming mouse you can cycle trough the following options,
allowing you to keep the LEDs on permanently, intermittently, breathing, or having it cycle through. The software
o ers the following options:
• Colorful streaming
• Steady
• Breathing
• Colorful tail
• Neon
• Colorful steady
• Flicker
• Stars twinkle
• Wave
• LED o
Additionally, the color of the LED lights can be adjusted by using the RGB sliders or color wheel freely. You can also
choose to use the numerical input instead of the sliders.
2. To adjust the LED lights on both sides of the scrolling wheel/middle mouse button you can cycle through the 6
di erent modes, corresponding to the 6 DPI settings as follows:
• 400 DPI
• 800 DPI
• 1600 DPI
• 3200 DPI
• 6400 DPI
• 10000 DPI
7. LED notifications
The LED lights at both ends of the mouse indicate the status of the connection and the battery information.
1. LED lights at the backside of the gaming mouse:
7
EN