Huepar 7211CG Manual Del Usuario página 6

505nm-660nm
User Guide, Maintenance and Care
• When not in use please power OFF the tool and place the pendulum
lock in locked position.
• The laser tool is sealed and calibrated at the plant to the accuracy
specified.
• It' s recommended to carry out an accuracy check before its first use
and periodic checks during future use especially for precise layouts.
• Do not touch the glass window in case leaving any fingerprint on the
window, which may affect the performance of the laser.
• Do not store the laser tool in direct sunlight or expose it to high
temperatures. The housing and some internal parts are made of
plastics and may become deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth, NEVER use
solvents. Use a soft, dry cloth to remove moisture from the tool before
storage.
• Store the tool in its case when not in use. If storing for extended time,
remove batteries before storage to prevent possible damage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle in line with local provisions for the collection and
disposal of electrical and electronic waste under the WEEE Directive.
Charging and Battery Safety
Please read thoroughly and comply with battery safety instructions and
attention before charging.
Fail to read and follow may result in personal injury, fire, and property
damages if the battery is charged and/or used improperly.
-4-