Huepar 7211CG Manual Del Usuario página 8

Operation Modes
Turn ON the laser tool:
• Method 1: Slide the pendulum to the Unlocked Position to turn on the
laser tool. Self-leveling Mode is turned on by default.
• Method 2: When the pendulum in Locked Position, press button
and hold for ≥ 2 seconds to turn on the laser tool. Manual mode is
turned on by default.
• The Power Indicator(5) will light up when the laser tool turned ON.
Note:
• After power on, the current battery level will be displayed on Power
Indicator(5), ranging from 1 to 3 indicator(s).
• When only one battery indicator flashes slowly, the battery needs to
be charged.
Lines switching:
• Short press
button repeatedly to switch the composition of
different laser lines.
• Laser line will switch in the following order:
①All Lasers ⇒②Horizontal Line ⇒③Vertical Line + Up Dot + Plumb Dot
Switch to Pulse Mode:
• Press button and hold for ≥ 2 seconds to turn the Pulse Mode on,
the Pulse Mode Indicator(3) will light up.
Note:
• Laser level can work with Laser Receiver to extend working range
under pulse mode.
• When switching between Pulse Mode and Normal mode, the laser
beam(s) will blink fast as a reminder.
Adjust Brightness:
Short press button to adjust beams brightness.
-6-