Publicidad
Idiomas disponibles
Idiomas disponibles
▪
Lift the deflector guard (9) and pull the grass catcher (3) off the hinges to remove it.
▪
Empty the collected material onto a compost heap and reattach it onto the product.
7.3
Cable routingAlways route the electric main cable away from the work area to
prevent it from coming into contact with the cutting device. Plan your route before
starting work. Start your work at the nearest point to the electrical outlet, and work
away from it. This will keep the cable away from the cutting device and avoid it being
accidentally cut. Keep the cable over your shoulder for added safety.
▪
For cord strain relief of the cable, form a loop of the end of the main cable and bring this
through the opening at the handle and insert it into the cord strain relief (see Fig. 8).
▪
Insert one end of the extension cord into the equipment plug.
WARNING! Securing the extension cord in this way helps to prevent you from
accidentally disconnecting the extension cord from the equipment during
operation.
▪
Plug the other end of the extension cord into a socket outlet that acts as a power supply.
▪
Keep the area to be cleared free of stones, toys or other foreign objects that the cutting
and raking device might pick up. Such items could be hidden by grass and are easy to
overlook, so be sure to conduct a thorough inspection of the area before beginning work.
8
OPERATION
WARNING! Always switch the product off and pull the mains plug from power
supply before any operation.
8.1
Adjusting the handle height
▪
To adjust the height of the handle, pull the handle-height adjustment lever (19) to loosen it.
▪
Choose you desired handle height between the three positions and then pull back the
lever.
Position
1
2
3
8.2
Cutting depth adjustment
▪
Adjust the depth according to the needs of your lawn. The most suitable depth depends on
the kind of lawn and the actual height of the grass.
▪
Push the depth adjustment lever (Fig. A, 8) towards the wheel, then move it forward or
backward to adjust the cutting depth (see Fig. 9).
▪
Adjust the lever (Fig. A, 8) to one out of the five stages. Read the adjusted depth from the
scale (see table below).
Copyright © 2024 VARO
Height
950 mm
1050 mm
1150 mm
POWXG75160
P a g e
| 8
EN
www.varo.com
Publicidad
