Environmental Protection - Worx Hydro Shot WG629E Manual De Instrucciones

Watering
ATTACHMENT OF
ACCESSORIES
A number of accessories have been supplied with
this product and are required for use in different
applications. Do not attempt to use cleaning
without a lance or any accessories attached.
1. Soap bottle (WG629E.1 WG629E.91 only)
Soap bottle provides detergent suds for deeper
cleaning of dirt. It is used in conjunction with power
nozzle or extension lance. (See Fig. N1, N2)
2. Brush (WG629E.1 WG629E.91 only)
Brush is for cleaning cars, boats, motorcycles
etc. It is used in conjunction with power nozzle or
extension lance. (See Fig. O1, O2)
3. Foldable water bucket (WG629E.1
WG629E.91 only)
Foldable water bucket allows you to connect to water
supply when you are far away from a water source.
When not in use, it can be folded for storage. (See
Fig. P1, P2)
4. Turbo nozzle (WA4037, not included in
WG629E models)
The turbo nozzle delivers 360° of rotating water,
16
which cleans a larger area than the 0° water pattern
during the same time period. Recommend to use it
with high pressure setting (See Fig. Q)
5. Window squeegee with water sprayer
(WA4050, not included in WG629E models)
The window squeegees quick connection easily
snaps into the tool to spray water or wipe off
water from glass or tiled surfaces. Suitable for the
HydroShot power cleaner or the extension lance.
(See Fig. R1, R2, R3, R4)
6. Bottle cap connector (WA4038, not
included in WG629E models)
The bottle cap connector accessory allows the tool
to directly connect with most 2 Liter bottles with
approximately 1" openings. (NOTE: May not fit all
consumable soda and water bottles) (See Fig. S1,
S2, S3)
WARNING: Do not install the bottle cap
connector accessory until it is ready to be used.
The accessories vents will leak liquid, if a bottle is
installed, with the machine lying on a surface.
MAINTENANCE
Remove the Battery Pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Inspect the product for damaged or worn parts
before each use. Do not operate it if you find
2 in 1: Portable Power
Cleaner/Water Sprayer
damaged or worn parts. Contact your supplier or the
See Fig. M
manufacturer for replacement parts.
Hose filter maintenance
Remove the hose filter from the hose and get out
the strainer. Rinse the parts with clean water before
reassembling.(See Fig. T1,T2)
CLEANING/STORAGE
Before Storage, completely drain all the water from
the machine and hose.
Clean the moulded plastic housing of the machine
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Store in a secure and dry place
out of the reach of children. Do not place other
objects on the product.
Store the machine and the accessories in a frost free place.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
EN