Parker Hyperchill 310 Manual De Uso página 17

perature is too low, add the appropriate quantity of glycol, as
explained under heading 3.4.2
4.3 Stop
Water Outlet Temp.
b1 : 7.0 C°
Pump :
Comp 1: Comp 3:
Comp 2: Comp 4:
(P2)
Press the button to enter in the "main" menu.
Main menu
On
OFF
USER
(P5)
Press the button to select "OFF"
Main menu
On
OFF
USER
(P6),
Press the button the message "OFF" appears
OFF
(P6)
Press the button and the arrow fl ashing.
English
Press the button
Pump
Comp 1:
Comp 2:
Warning: Do not turn off the main switch QS [P0] to ensure
that any antifreeze protection devices will still receive elec-
trical power.
4.4 How to change the set point
1/7
Press the button
Main menu
On
OFF
USER
1/7
Press the button
Main menu
OFF
USER
DIrE
Press the button
Hyperchill 310-360
(P6)
the chiller stop.
Status Unit : OFF
:
Comp 3:
Comp 4:
(P2)
to enter in the "main" menu.
1/7
(P5)
to select "DIrE"
1/7
(P6)
the message "DIrE" appears.
DIrE
(P5)
Press the button the fi rst parameter is the set point
SEt
Temperature Control
Set Point
(P6)
Press the button to enter on the parameter
07.0
Temperature Control
Set Point
(P4) (P5)
Press the buttons or
(P6)
Press the button to confi rm
(P3)
Press the button to ESC
4.4.1 Visualization probes
Water Outlet Temp.
b1 : 7.0 C°
Pump :
Comp 1: Comp 3:
Comp 2: Comp 4:
(P5)
Press the button to visualize the probes.
to modify.
5/10