Publicidad
Idiomas disponibles
Idiomas disponibles
•
Install and secure the aluminium tubes with the knobs provided (including 4 short grey knobs and 1 long blue knob for
joining the tubes)
•
Mount the 4 legs and adjust the stool to the required height.
•
All fasteners must be properly tightened and checked regularly.
•
Ensure that the locking fingers on the leg extensions are correctly engaged.
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
• Clean the product regularly with a damp cloth and disinfectant. Do not use abrasive products, detergents or solvents.
• Dry with a clean, soft, dry cloth.
• The stool should be serviced every year completely.
• It is recommended to service the product at least once a year. If the product is subject to heavy use and/or use in a multi-
user environment, we recommend that it be serviced more frequently.
• In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
•
Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Type of control
Seat and backrest control
Checking the fasteners
Checking the rubber feet
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
your product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to carry
out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious injury.
•
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near
a radiator) or near a cold source.
•
Keep away from all flames and sources of sparks.
•
Respect the conditions for storing your product :
•
In a dry and temperate place
•
Protect your product from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on the product elements,
do not jam anything...).
PERIOD OF USE
The life expectancy of this product is 5 years under normal use, safety and maintenance conditions for a user. Beyond this period,
the product can be used for as long as it is still in good condition.
If the device is used in a multi user environment (such as a nursing home or hospital) then service life may be reduced.
DMI-F-06_Annexe 2_Notice.3.docx
Version Septembre 2023
Method
Adjustment/Visual Checking
Adjustment
Adjustment/Visual Checking
Frequency
Before each use
Once a month
Once a month
Page 6 sur 13
Publicidad
