Fanvil X4U Guía De Instalación Rápida página 5

Device Installation
Please follow the instructions in below picture to install the device.
Bracket desktop installation
Wall mounting (wall stand need buy separately)
Connecting to the device
Please connect power adapter, network, PC, handset, and headset
to the corresponding ports as described in below picture.
① USB port: connect USB device (USB flash drive, USB dongle)
② Power port: connect the power adapter.
③ Network port: connecting local area network or Internet.
④ PC port: the network port connect to the computer.
⑤ Headset port: connect headset.
⑥ Handset port: connect IP Phone handset.
USB
DC 5V Internet
Note: You can contact your service provider for additional settings that may be necessary to con-figure the phone, or download the user
manual and FAQ for more detailed information.
Headset
PC Handset
Phone Configuration
Configuration via LCD menu of phone
1. Press Menu > System (default password 123) ;
2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE) ;
3. Select Accounts:Confirm > Settings > Confirm, open
registration, fill in: registration address, registration user name,
registration password, SIP user, display name, registration port,
etc. ;
4. Save the configuration.
Configuration via web
1. Get the IP address from the phone: Press
Status > ETH IP ;
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment (The default
username and password are both 'admin') ;
3. Configure: Select network/account etc, and fill the relevant
content ;
4.Save the configuration.
Language setting
1. Press Menu key > Basic > Language.
2. Select the desired language and press OK soft key.
Making a call
1. Pre-dialing: enter the phone number and pick up the handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter phone number and press
4. Headset: enter phone number and press
5. Designated line: press line key, enter phone number and
press dial key.
Accepting a call
1. Using the handset: pick up the handset.
2. Using the headset: press
3. Using the handsfree: press
Redial
1. Press key, redial a call number.
- 3 -
key, or Menu >
or vice versa.
or vice versa.
.
.