Proline KTL07 Manual página 56

1. Select the correct voltage by turning the selector on the bottom of the
kettle.
2. Open the lid by pulling up on the handle on the lid.
3. Fill the kettle with the desired amount of fresh tap or filtered water.
NOTE:
• Always fill the kettle between the minimum (0.15L) and maximum
(0.5L) marks. Too little water will result in the kettle switching off
before the water has boiled. Filling above the maximum mark will result
in boiling water splashing from the kettle.
• Make sure that the lid is firmly in place before connecting the power
cord to the outlet.
4. Close the lid by pressing it down until it clicks into place.
5. Connect the plug into a power outlet.
6. Press the power switch down to the "I" position to switch on the kettle.
• The indicator light on the switch will illuminate and the water begins
to heat.
7. When the water has boiled, the kettle will switch off automatically and the
indicator light will go out.
• You can stop the boiling process by setting the power switch to the 0
position.
8. You can make hot drinks using the supplied cups and spoons. Slowly pour
the boiling water into the cups.
WARNINGS:
• Use caution when pouring the water from your kettle. Contacting
boiling water may result in a serious burn.
• Do not open the lid while the water in the kettle is hot.
NOTE: Let the kettle cool for 15~20 seconds before continuing to boil water.
9. Ensure power supply is turned off when kettle is not in use.
KTL07.indd 53 KTL07.indd 53
OPERATION
This kettle can work in two voltages.
• Select the 220-240V voltage for use in the
vast majority of the world such as Great Britain,
Europe, China, Africa and Australia.
• Select the 100-120V voltage for use in the
countries and regions such as America, Japan,
Taiwan, Canada and Mexico.
53
10/11/2023 2:41 PM 10/11/2023 2:41 PM