Hitachi CP-X2021WN Manual De Usuario página 217

Commands Control Description
ERST ?
Error Status inquiry
LAMP ? Lamp Status inquiry
INST ? Input Source List inquiry
NAME ? Projector Name inquiry
Manufucturer's Name
INF1 ?
INF2 ? Model Name inquiry
INFO ? Other Information inquiry
CLSS ? Class Information inquiry 1
NOTE • The password used in PJLink
the Web Brouwser Comtrol. To use PJLink
any password in Web Browser Control.
• For specications of PJLink
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp/
1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temptrature error; one of 0 to
2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The mearning of 0 to 2 is as given below
0 = Error is not detected; 1 = Warning; 2 =
Error
1st number (digits 1 to 5): Lamp Time
2nd number : 0 = Lamp off, 1 = Lamp on
11 12 22 23 31 41 51 52
Responds with the name set in "PROJECTOR
NAME" of "NETWORK"
HITACHI
inquiry
Your model name,
"CP-X2521WN" or "CP-X3021WN".
Responds with the factory information and so
on
, see the web site of the Japan Business
TM
PJLink command (continued)
Parameter or Response
"CP-X2021WN",
is the same as the password set in
TM
without authentication, do not set
TM
31