Using the Energy Display
Function (Optional)
This function displays the amount of electricity
generated on the indoor display as the product
operates.
Display the Current Energy Usage
1
Turn the appliance on.
2
Press
button and hold it about 3
kW [3 s]
seconds.
• The instantaneous power consumption (
or
) is displayed for a while on
some indoor units.
Display the Cumulative Energy
Usage (Optional)
1
Turn the appliance on.
2
Press
button and hold it about 3
kW [3 s]
seconds twice.
• The cumulative power consumption (
is displayed for a while on some indoor
units.
NOTE
• The unit of the displayed value is kW.
• It is not displayed on the wireless remote
control.
• kW refers to instantaneous power
consumption.
• kWh refers to cumulative power consumption.
• If it is more than 99 kWh, which is the range
of expression, maintain it as 99 kWh.
• Power off resets its value.
• Display wattage under 10 kW(h) with 0.1
kW(h) unit, and display one over 10 kW(h)
with 1 kW(h) unit.
• The actual power may differ from the power
displayed.
Using the Light Off Function
(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit
display screen.
• Press LIGHT OFF button.
NOTE
• Turn on/off the Display screen.
• If the brightness of an indoor appliance's
display is set to OFF, pressing a button on the
remote control automatically turns the display
on for 5 seconds.
• This function may operate differently,
depending on the model.
Using the Comfort Air
Function (Optional)
Comfort Vane Operation
This function conveniently sets the vane to a
preset position to deflect the supply air away
from blowing directly onto the occupants in the
room.
1
Turn the appliance on.
)
2
Press COMFORT AIR button repeatedly
and select the desired direction.
or
is displayed on the display
•
screen.
NOTE
or
is displayed on some indoor units.
•
• This function is disabled when you press
MODE or JET MODE button.
• This function is disabled and auto swing of
vertical direction is set up when you press
button.
SWING
• When this function is off, the horizontal vane
operates automatically depending on the set
mode.
EN
23