Retekess TD175 Manual página 6

Put the pager back to the charging slot of the transmitter
unit to stop the pager call prompt;
Note: Before calling. make sure that the pager has
completed the code pairing and the food tray has been
removed from the charging base.
3.5 One-touch shutdown of the pager
When the main unit is in standby mode (you can return to
standby mode by clicking the "Back" button several times.
and the screen will display 000). and the pager boards
are inserted in the charging slots. click "999" in the digital
area of the transmitter. and then click the "Call" button.
3.6 Function Setting
Press and hold the "Setting" button for 3 seconds to open the function menu; click the "Up" button to select the function menu "F1-F4".
click the "Call" button to select the function menu "F1-F4". click the "Call" button to select the function menu "F1-F4". Click "Call" button
to enter the corresponding sub-menu. select the corresponding command to set the corresponding function.
The functions of each command are as follows:
correspond-
menu
ing
instruction
F1
F2 000
001
002
003
Functional Description
New pager code pairing
Launch host keyboard mute on
Transmitter host keypad audible
feedback on
Launch host keypad vibration
feedback on
Launch host keyboard sound +
vibration feedback on
All the LEDs of the pager are off. which means the pager
is in the shutdown state. and 2 LEDs will light up later.
showing that the pager is in the charging state.
Note: The pager needs to be coded before this function
can take effect.
Operating Instructions
As shown in the figure above. "code pairing operation".
After entering F2. when the transmitter host displays 000. press
the call key and the host keypad mutes mode on
After entering F2. when the transmitter host displays 001. press
the call key and the host keypad turns on the sound feedback
After entering F2. when the transmitter host displays 002. press
the call key and the host keypad turns on vibration feedback
After entering F2. when the transmitter host displays 003. press
the call key and the host keypad turns on sound + vibration
feedback
04