Moulinex companion xl HF807E Manual Del Usuario página 31

YOUR APPLIANCE HAS 2 OPERATING
MODES:
• Automatic program mode:
Speed, cooking temperature and duration
are pre-programmed to make sauces,
soups, stews, steamed dishes, pastry and
desserts automatically.
• Manual mode:
You can manually set the speed, cooking
temperature and duration.
YOUR APPLIANCE FEATURES A SAFETY LOCK
ON THE LID
The lid will lock every time the appliance is
switched on. This safety device stops the lid
opening while a recipe is being made (see
Fig.16).
Do not try and force the lid when it is
locked.
This safety device will unlock when the
appliance stops.
If you have selected a temperature over or
equal to 50°C and a speed higher than or
equal to 5, a 10 second countdown will appear
on the LCD screen on the control panel. (see
Fig.17).
The lid can only be opened at the end of the
countdown.
INSTALLING THE BOWL, ACCESSORIES AND
THE LID ASSEMBLY
• Before using for the first time, wash all items
(D, E, F, G) in warm soapy water, but not the
motor unit (A). Your bowl (D) is fitted with a
detachable spindle (D3) for easier cleaning.
• Ensure that all packaging has been removed
before use, particularly the protection
located between the bowl (D) and the motor
unit (A).
• Fit the seal (E4) on the seal holder (E3) (See
Fig. 1), clip the assembly to the lid (E2)
(See Fig 2).
• Position the seal (D4) on the spindle (D3).
Lock the assembly onto the base of the bowl
with the locking ring (D6) (See Fig. 3). If you
use the cooking mode without a lid, position
the gasket D4 over the XL base accessory D5.
Use the locking ring to lock the assembly to
the bottom of the bowl D6 (see Fig. 3).
• Position the chosen accessory in the bowl:
- the accessories
the spindle
(See Fig. 4.1)
- the steam basket inside the bowl
(See Fig. 4.3 )
beforehand to fill the bowl (F5) with 0.7l
liquid (water,sauce...)
• Place the ingredients into the bowl or steam
basket.
• Position the lid with the arrow on the lid
handle on the left side. Align the triangle
on the lid with the triangle on the bowl
handle
(See Fig. 5)
anticlockwise
(See Fig. 6)
• Position the steam regulator cap (E1) on the
lid; two positions are possible: high steam (a)
or low steam (b).
The low steam setting allows a
maximum amount of condensa-
tion to be released and therefore
it is recommended to prepare
dishes and sauces for a better consistency
(risotto, egg custard desserts, sauces, etc.).
The high steam setting allows
a maximum amount of heat and
steam to build up in the bowl
for all types of steam cooking
(soups, etc.).
This setting also prevents splashing du-
ring mixing.
• Position the bowl (D) on the motor unit (A)
until you hear a "click" (See Fig. 8).
• The appliance only starts up if the bowl and
the lid are correctly positioned and locked
on the motor unit.
In the event of incorrect positioning or
incorrect locking of either (See Fig. 10.1
and 10.2), the logo
when a function is activated.
23
fit on
(F1, F2, F3, or F4)
,
(F5)
, having taken care
(See Fig. 4.2)
. Lock the lid by turning
.
starts to flash
,
EN
.