Product Use - Greencut GTC180X Manual De Instrucciones

ATTACHING THE CLAMPS
1. Secure the cables to the handlebar with the supplied clamps so that the
wiring does not become deformed.

PRODUCT USE

INSPECTION BEFORE STARTING
1. Make sure the safety cover is in place and that all nuts and bolts are secure.
2. Check the oil level in the engine crankcase.
3. See fuel supply. Fill the fuel tank at a prudent distance from the top of the tank to provide space for tank
expansion.
4. Make sure that the spark plug cable and spark plug are tight.
5. Check the position of the wheels and the locking of the wheels.
6. Check the position of the spur of the rotary tiller.
7. Check under and around the engine for signs of fuel leaks.
8. Inspect fuel hoses.
9. Look for signs of engine damage.
10. Remove dirt from the muffler and starter area.
USE
COLD START
1. Move the throttle lever up to the "START RUN" position.
2. Press the choke 3 times.
3. Pull the starter handle slowly once and allow it to retract normally. Then pull quickly.
4. Release the starter handle gently.
5. When the engine starts and warms up, move the lever to the working position (halfway) and the throttle
speed will increase.
1
START WITH WARM ENGINE
Follow the same steps as cold start but start the machine with the accelerator lever in the working position (half-way).
2
1
3
59
EN