Publicidad
Idiomas disponibles
Idiomas disponibles
2
3
Rotate the DISTANCE control knob anywhere from "10Ft" to "MAX" (100 ft). When the
DISTANCE control knob is turned to "10Ft," the detection zone is very tight and
compact, causing the detection sensitivity to be very high. The reverse is true, when
the DISTANCE control knob is turned to "MAX," it increases the detection zone
exponentially. Perform a "walk-by test" by walking across the motion detection field
at the approximate distance set on the DISTANCE control knob.
4
To Switch To Manual Mode
1
ON
OFF
Default
(Starting Position)
To return to "AUTO" mode: Turn the switch to the OFF position for 10 seconds and then ON.
IMPORTANT
MOTION SENSOR TO RETURN TO CONTROLLING THE FIXTURE THE NEXT DAY.
IMPORTANT
DAY. HOWEVER, THIS PROCESS MUST BE RESET EACH DAY AFTER DUSK TO DAWN FEATURE CYCLES THE PREVIOUS
DAY'S MANUAL OVERRIDE CYCLE OFF.
Customize Settings
SETTING THE LIGHT DURATION TIME
Rotate the MINUTES control knob away from the MOTION TEST and set between 1 and 10. Do
not rotate the MINUTES control knob back to the TEST area, or to Switch Control.
1:
Light will stay on for 1 minute after PIR detects motion.
5:
Light will stay on for 5 minutes after PIR detects motion.
10: Light will stay on for 10 minutes after PIR detects motion.
SECURITY LIGHT SENSOR RANGE SETTINGS
10Ft: 10 feet, short range
20Ft: 20 feet, average range
50Ft: 50 feet, long range
Max.: Up to 100 feet, extra long range
SWITCH CONTROL MODE
Switch Control allows the light to turn on at any time, by overriding all sensor controls,
so the light comes on regardless of time of day.
NOTE: If the fixture is in Switch Control mode, the built-in light sensor functions will not
work. If you want to temporarily override the dusk to dawn and motion sensor functions,
then you should use the manual override directions (see below).
Manual Override
ON
OFF
2-4 Seconds
Switch the power OFF, ON, OFF, and then ON within 2-4 seconds.
THE SECURITY LIGHT WILL REMAIN ON UNTIL THE INTERNAL DUSK-TO-DAWN SENSOR
DETECTS THE NEXT DUSK-DAWN CYCLE. ONCE THE LIGHT IS DETECTED, IT WILL ALLOW THE
MANUAL OVERRIDE ALLOWS THE LIGHT TO TURN ON AT ANY TIME, BY OVERRIDING ALL
SENSOR CONTROLS. IT ENABLES THE LIGHT TO ACTIVATE REGARDLESS OF THE TIME OF
The greater the DISTANCE setting, the
great the chance for false activations
by the PIR sensor.
ON
ON
OFF
OFF
180°
ON
OFF
9
Publicidad
