Kenmore 110.1681 Serie Guía Rápida Para Comenzar

We have taken great care to give your new washer the most convenient and easy-to-use features. Use this guide to help optimize the use of your
washer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME ® (1-800-469-4663).
805cries
Prewash
Soak
Models/Modelos/Modeles 110.1681 :_
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Measure detergent and pour into washer.
Drop sorted load loosely into washer. Load evenly
around agitator to maintain balance.
Close the lid.
Adjust controls based on your load.
Pull out Cycle Selector (Timer) knob to start.
Push in Cycle Selector (Timer) knob to stop the washer.
W T£R T£MIIIPIII£1 T I£8@ITRIL
You should select the wash/rinse water
temperature based on the type of load you are
washing. Always use the warmest wash water safe
for fabric and follow garment label instructions.
Depending on location, water temperatures may vary
by season. The fill rate may also differ depending on
the water temperature selected.
By selecting the WarmNVarm temperature setting, the
warm wash will be followed by an energy-saving cold
rinse followed by a warm spray rinse. This saves
energy while providing an effective rinse performance.
./ =,,_ Adjust to load size. Clothes should move freely. To change the water level after the wash action starts, you may turn knob to I
desired setting. On models with Variable Water Level Control, you can change the water level by turning the knob to Reset, |
then to the desired setting. This is necessary only when the change needs to be done once the machine has started to fill. J
8566914 Continued on back