Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Parts name
Product dimmensions
Wall drilling and fixing of brackets
Read the instructions carefully.
Unpack the cooker hood and check that all functions are operational.
Make sure that the voltage (V) and frequency (Hz) indicated on the manufacturing label match the vol-
tage and frequency at the installation site.
Verify that the area behind the installation surface to be drilled is free of electrical wires, cables, pipes,
etc. The stainless steel and glass surfaces of the fume hood are very easily damaged during installation
if rubbed or struck with tools. Take care to protect the surfaces during installation.
Protect the bottom cover surface with cardboard or similar to prevent damage during installation of the
top-mounted cooker hood.
The manufacturer is not responsible for failure to comply with all applicable safety regulations for the
correct and normal operation of electrical parts.
1
Main body
2
Ventilation valve
3
Filter assembly (2 or 3 optio-
nal)
4
Carbon filter (optional)
5
Check valve
6
Air outlet cover
7
Screws 5mm x 49mm
8
Wall plugs
19
English
infiniton.es
Publicidad
