Publicidad
Step 12
å
IMPORTANT: If you purchased the 422983 Hutch, finish drilling through the
four holes shown in the TOP (V) before fastening the UPRIGHTS (L and M).
å
NOTE: You will need someone's help in this step.
å
First, fill the holes in the LEGS (H, P, Q, and T) 1/4 to 1/2 full with GLUE (177M).
Then, insert four WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
å
Now, fill the exact four holes shown in the TOP (V) 1/4 to 1/2 full with
GLUE (177M).
å
Fasten the UPRIGHTS (L and M) to the TOP (V). Tighten four TWIST-LOCK®
FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the LEGS insert into the TOP. Wipe
away the excess GLUE.
The large hole
in the TOP (V)
should be here.
If you purchased the
422983 Hutch, finish
drilling through these
holes in the TOP before
fastening the UPRIGHTS.
Page 16
T
L
H
Q
M
V
Meet Part (V). This component has been
engineered to be lighter, stronger, faster...
well ok. Not technically faster. But definitely
makes for a sturdier Credenza that' s easier to
assemble and friendlier to the environment.
422984
2
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
177M
Fill the holes 1/4 to 1/2 full with GLUE.
If you purchased the
422893 Hutch, finish
drilling through these
holes in the TOP before
fastening the UPRIGHTS.
Electric drill
with 3/16" bit
P
15F
www.sauder.com/service
(4 used)
Publicidad
