Parkside 20 M PLEM 20 A4 Instrucciones De Utilización Y De Seguridad página 49

Start-up

Switching on/off
To switch the product on, press the MEAS
button . When the product is switched
4
on, the laser beam is activated.
To switch the product off, press and hold the
MEAS button for approx. 5 seconds
4
until the "OFF" is shown on display . If
3
no button is pressed for about 3 minutes, the
product turns off automatically to save the
batteries.
To switch measuring reference point: Press
the reference/unit button to change
5
measurement base from the top side of the
product to its bottom side or vice versa.
GB/IE 49