FCC COMPLIANCE STATEMENT
This equipment generates uses and can radiate radio frequency and, if not installed and used
in accordance with the instruction manual, may cause interference to radio communications. It
has been tested and found to comply with the limits for a Class A computing device pursuant
to Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection
against such interference when operated in a commercial environment. Operation of this
equipment in a residential area may cause interference, in which case the user will be
responsible for taking whatever measures necessary to correct the interference.
You may find the booklet "How to Identify and Resolve Radio-TV Interference Problems"
prepared by the Federal Communications Commission helpful. It is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Request stock No. 001-000-00315-4.
When this device reaches the end of its useful life, it must be appropriately disposed of. It must
not be disposed of as unsorted municipal waste. Within the European Union, this device
should be returned to the distributor from where it was purchased for proper disposal. This is in
accordance with EU Directive 2002/96/EC. Within North America, the device should be
disposed of in accordance with the local laws regarding the disposal of waste electrical and
electronic equipment.
It is everyone's responsibility to help maintain the environment and reduce the
effects of hazardous substances in electrical and electronic equipment on human
health. Please do your part by ensuring that the device is correctly disposed of.
The symbol shown to the right indicates that this device must not be disposed of
in unsorted municipal waste programs.
All rights reserved. Reproduction or use, without expressed written permission, of editorial or
pictorial content, in any manner is prohibited. No patent liability is assumed with respect to the
use of the information contained herein.
While every precaution has been taken in the preparation of this manual, the Seller assumes
no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained herein. All instructions and diagrams have been
checked for accuracy and ease of application; however, success and safety in working with
tools depend significantly upon the individual's accuracy, skill, and caution. For this reason, the
Seller cannot guarantee the result of any procedure contained herein. Nor can they assume
responsibility for any damage to property or injury to persons occasioned from the procedures.
Persons engaging in the procedures do so entirely at their own risk.
4
II
PROPER DISPOSAL
COPYRIGHT
DISCLAIMER
Serial Number ______________________
Date of Purchase ___________________
Purchased From ____________________
___________________________________
___________________________________
___________________________________
RETAIN THIS INFORMATION FOR FUTURE USE
8535-M231-O1 Rev C MB130