Publicidad
Idiomas disponibles
Idiomas disponibles
Controls a nd Features
4
Recoil
Hose Handle
Hose Extension
Chi
Nozzle Height
Adjustment
Lever
Hose Assembly
J
WARNING:
The operation
of any chipper
shredder
can result in foreign
objects
being thrown
into the
eyes, which can damage
your eyes severely. Always
wear the safety glasses provided
with this unit or
eye shields while operating
or while performing
any
adjustments
or repairs.
Chipper Chute
Allows twigs and small branches up to 1-1/2" in diameter
to be
fed into the impeller
for chipping.
See Fig. 4-1.
Nozzle HeightAdjustmentLever
Used to adjust the nozzle ground
clearance
ranging
approximately
5/8" to 4 1/8".
Nozzle
Yard waste such as leaves or pine needles
can be vacuumed
up
through
the nozzle for shredding.
HoseAssembly
Figure 4=1
HoseExtension
Used to vacuum
yard waste in hard to reach places of yard.
Nozzle/Hose VacLever
The nozzle/hose
vac handle is located
on top of the nozzle. Use
it to switch vacuum
suction
between
the nozzle and the hose
assembly.
HoseHandle
Used to guide hose assembly
when vacuuming.
Sag Handle
Used to grasp bag in order to assist in attaching,
removing,
and
emptying
bag. See Fig. 4-1.
RecoilStarter
The recoil starter is attached
to the right upper handle. Stand
behind
unit and pull the recoil starter to start engine.
Used as an alternative
to the nozzle to vacuum
yard waste such
as leaves or pine needles. See Fig. 4-1.
Publicidad
