REMOTE CONTROL INSTRUCTIONS (EP9R 500)
If your unit has the remote control, or if you have purchased the remote control, Model 1999, you
have the option of controlling your humidifier functions from a distance.
If the Humidifier is already on and operating when the I/O button on the remote is pressed,
command of the humidifier transfers to the Remote, and reverts to the settings last used with the
remote. You can readjust the settings as desired.
If the controls on the humidifier are used while the Remote Control is in command, control will
revert to the humidifier, and the settings will revert to those last used on the humidifier control
panel. The remote control will remain on until turned off.
When the remote is in control, the display on the humidifier will read EC (for
External Control).
The humidity and speed buttons operate the same way as their counterparts
on the unit.
The fan speed and humidity setting will display on the control panel as you
adjust them.
The default measure for temperature is Fahrenheit (°F), but pressing the I/O
button a second time will change to Celsius (°C)
Periodically the remote performs a frequency check and will be unresponsive
to input. Wait 5 seconds and try your input again.
All manuals and user guides at all-guides.com
To Turn the Remote on:
With both the humidifier and remote control OFF,
Press the I/O button on the remote control once.
This turns the humidifier ON and enables the
remote control to operate all the functions of the
humidifier.
(The humidifier control panel will display EC, for
External Control)
Press the respective humidity and Fan Speed
buttons to adjust the settings on the remote, just
as you would the actual humidifier.
The default setting for temperature readout is
Fahrenheit (F). If you prefer degrees Celsius (C),
press the I/O button one more time to use that unit
of measure.
Pressing the I/O button one more time will turn
both the Remote Control and the Humidifier OFF.
USING THE REMOTE CONTROL
8