Disassembly.
1
Ensure the unit is
powered down, turned
"OFF," and unplugged.
3
Unlock the
Locking Handle
from the
Basin Cover
by
pulling the handle backward
out of the "ears" on either
side of the
Basin
Cover.
Move the handle down.
20
2
Remove the pitcher from
under the spout. To prevent
No-Drip Spout
drips use the
cover to close the juice spout.
4
Remove the
Pulp Basin
from the Motor Base by
pulling upwards with the
Basin Cover
and
Sieve
still
in place, and take it directly
to your sink.
5
Remove the
Food Pusher
by
lifting it out of the feed chute.
7
Sieve
Gently lift the
vertically out of the center
of the Pulp Basin. Clean
Sieve
the
right away (see
care instructions).
6
Lift the Basin Cover vertically
off of the Pulp Basin and
remove any pulp from the
inside of the cover. You
may use the flat end of the
Cleaning Brush
to scrape
pulp off of the cover.
8
Pulp
Basin. Use
Empty the
Cleaning
the flat end of the
Brush
to easily scrape out
the pulp and set it aside
for use in other recipes or
composting. You can also
empty the pulp into your
waste bin or compost.
21