Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
STEP 1 - REMOVE ALL MOUNTING HARDWARE
Shut off water supply and remove the
hexagonal nut, the disk and the gasket.
Do not remove the o-ring from the base of
the faucet.
STEP 2 – INSTALLING THE FAUCET
Place the faucet with the o-ring
into the hole in deck or lavatory.
1
Make sure the o-ring is located
between the deck or lavatory and
the bottom of the faucet.
Under the deck, slide the gasket,
disk and hexagonal nut over
2
the flexible hose and secure the
faucet into place.
4
Hexagonal nut
size of the hole:
29-31 mm / 1.14"-1.22"
O-ring
Hexagonal nut
O-ring
Gasket
Disk
O-ring
Center
hole
Gasket
Disk
Publicidad
