Canon G2030 Serie Guía De Inicio página 7

7
Repeat steps 1 through 6 to pour all ink into the
corresponding ink tanks on the right.
Check!
8
Close the scanning unit / cover.
•
If you lift the scanning unit / cover slightly and release
it, it will close by itself.
9
Press the OK button.
•
The ON lamp flashes and the ink system preparation
starts. It takes about 6 minutes to complete.
Flashing
C
M Y
If the Alarm lamp flashes or lights
Count the number of flashes.
•
4 times
Print heads are not installed correctly.
"4. Installing the Print Heads" on page 3
•
5 times
Print heads cannot be recognized.
"4. Installing the Print Heads" on page 3
For all other cases, refer to the Online Manual.
5