Bosch BMCT-RZ Guía De Uso página 10

Relay
Start-up/pairing
Ensure that you have a Bosch Smart Home controller and the Bosch Smart
Home app and have successfully configured both. Now start the Bosch
Smart Home app and select "Add new device". Follow the instructions in
the app.
Once the module has been switched on via the fuse, it is in pairing mode
for 3 minutes. Pairing mode can be started on an unlinked module by
pressing the system button (1) again or a connected switch (S1).
݅ You can also view the explanatory videos and additional information on
our website for further help with mounting, installing, starting up and
restoring the factory settings on your Bosch Smart Home relay:
→ https://www.bosch-smarthome.com/rom/relay
The status LED (2) shows the status of the relay module using flashing
codes.
Status LED
flashing Device status
sequence
Pairing mode (is
Flashes active) or device is
orange communicating with the
controller
Pairing mode
Flashes
(successful) or process
green
confirmed
Pairing mode (not
Flashes
successful) or process
red
failed
↑Contents
8-750-002-900 | V001 | 06/2024
Recommended action
Please wait
–
If this is the first pairing attempt,
please try again. Otherwise
reset the device to the factory
settings and contact the service
department if necessary.
English | 10
Bosch Smart Home