Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent.
To see which cleaning products have been tested and approved by Pressalit
for the specific product, please visit Pressalit.com and refer to the product's
item number. Pressalit recommends cleaning the product after installation.
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids.
• Never spray the product directly with a high pressure cleaner.
• Avoid use of abrasive, corrosive or chlorine-based cleaning or
disinfecting products.
To remove limescale
To remove limescale marks on the aluminium parts, use 3 parts 30%
household vinegar to 7 parts water and afterwards wipe the parts with a cloth
wrung out in clean water .
In countries with relatively high levels of lime in the water supply, it may be
necessary to remove limescale deposits from the aluminium parts using a
de-scaling agent such as acetic acid . Test this first on a area that is not visible
when the product is in use .
CAUTION
!
IMPORTANT
en
21
Publicidad
