Publicidad
Idiomas disponibles
Idiomas disponibles
Installations with a Diverter
Discard plaster
guard with dome.
Valve Stem
Actuator
Diverter
Stem
Guide
Setscrew
4. Diverter Assembly
CAUTION: Risk of damage to the K-306-KS valve assembly.
When using the K-306-KS HiFlow Valve in a fiberglass or acrylic
installation, use the Thin Wall Installation Kit (88526).
For Valves With a Diverter
Remove and discard the plaster guard and/or dome, if installed.
Position the actuator over the diverter stem and tighten the
setscrew.
Slide the guide over the actuator and thread onto the diverter
stem.
For All Models
Remove and discard the plaster guard and/or dome if they are
installed.
Slide the faceplate over the valve stem.
Set the shroud against the faceplate.
Kohler Co.
All Models
Discard plaster
guard with dome.
Valve Stem
Faceplate
7
Shroud
1023658-2-B
Publicidad
