Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
minutes before further use. As long as the milk
EN
frother is hot, the thermostat prevents it from
being used. You can rinse the inside of the
milk frother with cold water to accelerate the
cooling process.
HEATING MILK 1. Connect the power plug to a suitable power
outlet.
2. Open the lid and remove the whisk from the
rotating shaft.
3. Fill in milk. The milk level must be between
the mark "MAX" and "MIN".
4. Put the lid on firmly by pushing it down
slightly.
5. Place the milk frother on the base.
6. Switch ON the product and the button will
light up. The product will begin to heat.
7. The temperature of milk will reach approx.
70°C around 1 minute and the product will
stop operating. If the frothed milk is not
removed and the temperature of the milk
falls below 50°C, the milk frother will start
operating again automatically.
You can also press the ON/OFF button to turn
OFF the product.
8. Remove the milk frother from the base and
open the lid.
9. Then pour the milk from the milk frother.
10
Publicidad
Tabla de contenido
