Publicidad
Idiomas disponibles
Idiomas disponibles
Change the fan speed
Press the fan speed adjustment
button to change the speed.
NOTE: The fan has three speeds.
Low, medium and high.
Adjust the speed with the
machine turned on.
NOTE: The machine
automatically defaults to a low
speed every time it is turned on.
Adjusting the base
Pull out the sides of the fan base
to fit the fan comfortably on a 5
Gal bucket (recommended).
Misting mode
Place the water hose in a water
source. It is recommended to
fill up a 5 Gal bucket with fresh
water and place the fan on top of
the bucket for stability.
Once the water hose is in the
water source, press the misting
speed adjustment button to turn
on the misting mode or adjust
the misting speed.
Press the misting speed
adjustment button or the on/off
button to exit the misting mode.
NOTE: There are 3 misting
options. Low, Medium and High.
Adjust the misting mode with the
machine is on or off.
NOTE: The misting mode
automatically defaults to a
high speed every time entering
misting mode.
NOTE: Avoid prolonged activation
of the misting mode when the fan
is without water.
NOTE: It is recommended to use
tap water.
The on/off button can be used
to turn off the fan or exit the
misting mode, either separately
or together.
6. MAINTENANCE
WARNING: Always remove or disconnect
battery pack or adaptor before adjusting,
cleaning, servicing or transporting the fan.
1) CLEANING AND MAINTENANCE
1. Always take off battery pack and adaptor when
maintaining the product in order to refrain from the
20V Cordless Misting Fan
injury.
2. Do not put the fingers, sticks or other similar
objects into the fan in case of injury or product's
damage.
3. Keep away from chemicals to prevent damage and
personal injury.
See Fig. E
4. Wipe clean with a dry cloth.
5. Keep the motor ventilation slots clean. Keep all
working controls free of dust. If you see some sparks
flashing in the ventilation slots, this is normal and will
not damage your machine.
6. Clean the sponge at the front end of the water
hose.(See Fig. I)
See Fig. F
2) STORAGE
1. Store in a secure, dry place out of the reach of
children.
2. Do not place other objects on the product. Employ
only the same replacements for it may contribute
to the damage of product when using other
replacements.
3. Not recommended for use in wet/damp areas.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0 °C-45 °C (32 °F-113 °F).
The recommended ambient temperature range for
See Fig. G, H
the charging system during charging is 0 °C-40 °C (32
°F-104 °F).
Details regarding safe disposal of used batteries
At the end of the life of the appliance, remove the
battery pack safely before disposing of the appliance.
Do not throw batteries away or throw them in the
normal trash can. Also do not dispose of the battery
with the machine. Remove the used battery pack
from the appliance and dispose of it at the nearest
or convenient dedicated recycling facility. If in
doubt, consult your local environmental protection
department. Batteries may enter water cycle if
disposed improperly, which can be hazardous for
ecosystem. Do not dispose of waste batteries as
unsorted municipal waste.
9
EN
Publicidad
