Wolf KGXD Instrucciones De Montaje página 31

Remove
Seal all the way
round the edge
3064441_201802
KGXD stacked air routing
Refit louver damper.
Remove slide-in rail and condensate deflector plate (only with mist eliminator (top)).
Sealant
Apply sealant along the edge of the plate facing the cube element.
Refit condensate deflector plate and slide-in rail.
Seal condensate deflector plate all the way round the edge.
Any condensate must drain off through the fins in the plate element.
Reinsert mist eliminator.
Secure with screws
Secure with screws
Use screws and drilled holes to secure the bypass
damper and recirculation air damper (optional)
("with a mist eliminator (bottom)" supplied loose)
to the supports.
31