Norwood LumberPro HD36 Instrucciones Originales página 13

Assembly Instructions
LM34-HD-41500-INST (2023-01-24).indd 5 LM34-HD-41500-INST (2023-01-24).indd 5
Slide the receiver brackets (item #22)
over the log turner frame (item #16), as
shown in the picture.
Install this assembly to the bed frame
(see view detail "A" for recommended
location) using existing 3/8" x 1 1/4" bolts
and nuts.
Install the 3/8" x 3/4" flange bolts (item
#26) inside the receiver bracket (item
#22).
(For a better visualization, the bed frame
is not shown on the picture)
NOTE: Pay attention to what side of the
log turner frame the bolts are installed.
These bolts are there to stop the frame
to move while turning a heavy log.
Secure the log turner frame with the
3/8" x 1 1/2" bolts (item #4). (For a better
visualization the bed frame is not shown
on the picture)
NOTE: Pay attention to what side of the
log turner frame the bolts are installed.
These bolts are there to stop the frame
from moving while turning a heavy log.
EN–5
2023-01-24 9:47:46 AM 2023-01-24 9:47:46 AM