Norwood LumberMax HD38 Instrucciones Originales página 11

Assembly and Installation Instructions
Install the rollers (item #18) onto the toe
board body (item #7) using the roller
axle (item #15). Lock it in place using the
cotter pin (item #17).
Assemble items 6,7,8,9 and 10 together
using four 3/18" x 1 1/2" bolts (Item #4)
and four 3/18" x 2 1/2" bolts (Item #5).
Install the hydraulic cylinder (item #11)
using the ¾" x 4" bolt (item #2) and the
nut (item #1).
Note: Do not over tighten.
EN–5