HIKVISION DS-TCP440-DB Guia De Inicio Rapido página 6

Avoid device installation on vibratory surfaces or places. Failure to

comply with this may cause device damage.
DO NOT touch the heat dissipation component to avoid burns.

DO NOT expose the device to extremely hot, cold, or humidity

environments. For temperature and humidity requirements, see device
specification.
If smoke, odor, or noise arises from the device, immediately turn off the

power, unplug the power cable, and contact the service center.
If the device cannot work properly, contact the store you purchased it or

the nearest service center. DO NOT disassemble or modify the device in
the unauthorized way (For the problems caused by unauthorized
modification or maintenance, the company shall not take any
responsibility).
Keep all packaging after unpacking them for future use. In case of any

failure occurred, you need to return the device to the factory with the
original packaging. Transportation without the original packaging may
result in damage to the device and the company shall not take any
responsibility.
Please enforce the protection for the personal information and the data

security as the device may be confronted with the network security
problems when it is connected to the Internet. Contact us if network
security risks occur.
Please understand that you have the responsibility to configure all the

passwords and other security settings about the device, and keep your
user name and password.
DO NOT touch the lens with fingers directly in case the acidic sweat of

the fingers erodes the surface coating of the lens.
DO NOT aim the lens at the strong light such as sun or incandescent lamp.

The strong light can cause fatal damage to the device.
DO NOT disconnect the power during formatting, uploading, and

downloading. Or files may be damaged.
5
English