Orbegozo RO 1030 Manual De Instrucciones página 15

RO 1030
SETUP
Do not start using the radiator until the base is completely fitted.
a. To fix the front support base, fit it tightly against the bottom of the front panel
b. To fix the back support base, fit it tightly against the last fin.
c. After fixing the supports, confirm that the heater is stable on the floor.
OPERATING INSTRUCTIONS
Place the heater on the floor at least 90 cm away from the wall and any other objects such as furniture,
curtains or plants. If the objects are flammable, keep it at least 1 meter away.
PART DESCRIPTION
A Handle
B Front cover
C Thermostat
D Switch
E Front base
F Fins
G Back base
15