Orbegozo RO 1030 Manual De Instrucciones página 16

RO 1030
With the power switch in the OFF position, plug in the heater. Switch in the LOW position for heating.
USING THE THERMOSTAT
The thermostat will automatically maintain your desired room temperature.
- Turn the thermostat control clockwise all the way round until you hear a "click", this sounds indicates
that the heater is activated. Continue turning the thermostat clockwise to its highest setting.
- Turning the thermostat clockwise will always increase the set temperature. Turning it anticlockwise
will decrease the set temperature. The thermostat will automatically turn the heater on and off.
NOTE: This heater is oil filled and will cool down slowly after the power is switched off. Allow the
heater to cool down before moving and always use the built-in handle
CLEANING AND STORING
- Always disconnect the heater from the mains supply before cleaning.
16