Descargar Imprimir esta página

Ego Power+ HT2600 Manual De Funcionamiento página 12

Orilladora de arbustos inalámbrica de ion litio de 56 v

Publicidad

Idiomas disponibles

Idiomas disponibles

 Check damaged parts before further use of the hedge trimmer. A guard or other
part that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other condition that
may affect its operation. A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center unless indicated elsewhere in
this manual.
 Check the blade and motor mounting bolts at frequent intervals for proper tightness.
Also, visually inspect blade for damage (e.g., bent, cracked, and worn). Replace the
blade only with a blade from the original equipment manufacturer (OEM).
 Replace the blade if it is bent or cracked. An unbalanced blade causes vibration that
could damage the motor drive unit or cause personal injury.
 If the equipment should start to vibrate abnormally, stop the motor and check
immediately for the cause. Vibration is generally a warning of trouble.
 The trimmer shall be used to cut stems less than 1.2 in. (30.5 mm) thick.
 Trim only in daylight or in good artificial light.
 Remove or disconnect battery before servicing, cleaning, or removing material from
the hedge trimmer.
 Do not wash with a hose; avoid getting water in motor and electrical connections.
 When servicing use only identical replacement parts listed in this manual. Use of
parts which do not meet the original equipment specifications may lead to improper
performance and compromised safety.
 Do not incinerate the appliance even if it is severely damaged. The batteries can
explode in a fire.
 Follow instructions for lubricating and changing accessories.
 Keep handles dry, clean and free from oil and grease.
 Check the hedges and bushes for foreign objects, e.g. wire fences and hidden wiring
before operating the tool.
 Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product and possible injury.
12
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC
SAVE THESE INSTRUCTIONS!

Publicidad

loading

Este manual también es adecuado para:

Ht2600-fcHt2601