Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL PANEL
Clean the Control Panel gently with a lightly dampened cloth.
CLEANING THE FILTERS
Check and clean the filters regularly for best performance.
1.
Remove the lower dishwasher rack.
2.
Rotate the Cylinder filter counterclockwise a quarter turn and lift up to
remove.
A
3.
Empty the Cylinder filter and rinse it under running water.
4.
Remove the Fine filter.
A
5.
Remove the Micro filter from the bottom of the tub.
A
6.
Inspect both the Fine filter and the Micro filter for debris, and then
clean them by holding the filters under slow running water.
NOTE: A stiff, plastic bristle brush may be needed to remove some
debris.
7.
Reinstall the filters in reverse order making sure the Cylinder filter locks
into place.
NOTE: Failure to correctly re-install the filters will result in diminished
performance and a potential need for service.
a
Cylinder Filter
a
Fine Filter
a
Micro Filter
29
Publicidad
