Descargar Imprimir esta página

GE Profile PLS624 Manual Del Propietario E Instrucciones De Instalación página 13

Estufa para vehículo recreativo a gas propano

Publicidad

Idiomas disponibles

Idiomas disponibles

Interior Surfaces
Oven Door
Door Interior and Exterior
Do not allow excess water to run into any of the holes
or slots in the door. Wipe dish soap over any baked-on
blade to clean it off. Then wipe over the glass with a
soapy cloth to remove any residue and dry off.
To Remove the Door:
2. Pull the hinge locks up and away from the range
frame to the unlocked position.
Pull hinge locks up to unlock
3. Firmly grasp both sides of the door near the top.
from the range frame.
5. Lift door up and away from the range until both hinge
arms are clear of the slots in the range frame.
Removal position
49-2001048 Rev. 5
To Replace the Door
2. With the door at the same angle as the removal
position, rest the notch on the underside of the left
hinge arm on the bottom edge of the left hinge slot.
The notch in the hinge arm must be fully seated into
the bottom of the slot. Repeat for the right side.
Bottom
edge of
slot
Notch
Rest notch on bottom edge
of hinge slot
3. Fully open the door. If the door will not fully open, the
notches in the bottoms of the hinge arms have not
seated correctly in the bottom edge of the slot. Lift the
door off the range and repeat previous step.
4. Push the hinge locks toward the range cavity and
down to the locked position.
Push hinge locks down to lock
5. Close the oven door.
Hinge arm

Publicidad

loading

Este manual también es adecuado para:

Profile pls624rtss