Wilfa INNOVAC AQUA PLUS Manual De Instrucciones página 10

OPERATION
EN
• Press the power button to start.
• After switching the vacuum cleaner on, press the speed regulation button to
adjust the speed. The speed will go from Auto-High-Medium-Low.
• When using the Auto level, the dust sensing function is enabled. After sensing
dust, the background animation on the display will change from blue to
purple. If no dust is detected, the animation remains blue, and power will run
on low.
• The battery time is indicated by a circle on the display, divided into 6 sections.
As the battery is consumed the circle will lower section by section. When the
battery is low, the display shows "Low Power".
Speed regulation
MOP ATTACHMENT
1. Before use, attach the mop onto the tank. Fill the tank with water and
close the lid. Do not fill over the max indicator.
2. Attach the mop to the floor brush by placing the mop attachment on the
floor, and gently lower the electric floor brush onto the mop attachment
(see illustration)
3. Press the foot pump to pump water onto the mop to keep the mop
INSTRUCTION MANUAL · INNOVAC AQUA PLUS
8
Power button
Display