Install the grates
NOTE
Install the grates as instructed below for longest life. When installed properly, the
openings in the grates are centered over the burners.
The three cooktop grates are designed to fit in specific positions on the cooktop.
For maximum stability, these grates should only be used in their proper positions.
• Place the left and right grates so that the thicker side of the right grate lines up
with the right side of the cooktop and the thicker side of the left grate lines up
with the left side of the cooktop.
• The center grate must be installed with the filled-in section, marked with the
word 'BACK', towards the back of the cooktop.
The center grate has two overhangs to help you locate the side grates correctly.
The overhangs will snag the side grates if you install the side grates in the wrong
direction or on the wrong side. See the illustration below.
To replace the grates correctly, follow these steps:
1. Orient the center grate as noted in the directions on the left.
2. Gently lower the legs of the center grate so that the legs rest in the center grate
dimples on the cooktop.
3. Orient the left and right grates so that the thicker side the right grate lines up
with the right side of the cooktop and the thicker side of the left grate lines up
with the left side of the cooktop.
4. Gently lower the legs of the right gate into the corresponding dimples on the
cooktop. Repeat with the left grate. When installed correctly, neither gate will
make contact with the overhangs on the center grate.
Thicker side must
be on the left
Thicker side must
be on the right
English 15