Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6.3 - HOW TO ADJUST THE MAXIMUM SPEED VALUE
There are two ways to change the maximum speed value for the remote speed adjust signals:
Using the product local tact buttons (only up to the maximum speed set by WEG EC Motor
Speed Controller)
•
Select local speed reference in the DIP switch number 1 (switch in ON position - see
item 6.2);
•
Using the tact buttons, adjust the speed to the value desired to be the maximum;
•
Select remote speed reference in the DIP switch number 1;
Using the optional WEG EC motor external speed controller (see item 6.4) (up to the
nameplate speed).
NOTE!
The standard manufacturing preset value for the maximum speed is the rated
speed informed in the product nameplate;
Consult WEG about different standard maximum speed values.
6.4 - EXTERNAL SPEED CONTROLLER (OPTIONAL)
The running speed and the maximum speed adjust can be done using the external WEG EC Motor
speed controller.
Figure 6.5 - The diagram of controller
www.weg.net
WECM / Emerald eZA Manual | 35
Publicidad
Tabla de contenido
